Powered by a liquid-cooled cast iron Kubota engine, this truckmount uses the patented Sapphire Scientific triple-source thermal well system to deliver consistent high heat. Cerakote ceramic coating lowers the heat radiation on all exhaust components by more than 30%—extends truckmount life and helps to keep van interiors cooler.
Everything is easily accessible and spaced for easy access—chemical feed is directly through the pump and adjustment through the flo-meter (no chemical diaphragm pump)—no heat exchangers to challenge your waste tank with bypass dumping of hot water or a diverter valve with solenoids and moving parts to perplex your distributor’s service department as to what is wrong with this thing! The El Diablo weighs approximately 700 pounds and can be mounted in either the rear or side of a van. A rear installation allows a vacuum hose reel to set next to the unit, leaving the rest of the van open.
Powered by a liquid-cooled cast iron Kubota engine, this truckmount uses the patented Sapphire Scientific triple-source thermal well system to deliver consistent high heat. Cerakote ceramic coating lowers the heat radiation on all exhaust components by more than 30%—extends truckmount life and helps to keep van interiors cooler. HydraMaster exclusive design
CLEANING AND RESTORATION EQUIPMENT:
The Phoenix R250 replaces the R200 in the Phoenix Rotomold LGR Product Line.
The Next Generation in the Phoenix R Series, the Phoenix R250 LGR Dehumidifier has been redesigned from the inside out to be a rugged, high-performance dehumidifier. Phoenix is leading the industry by introducing epoxy-coated coils. This new feature will extend the life of the coils, provide protection in corrosive environments, and maintain the coil’s heat transfer ability. Phoenix has also added a new heavy-duty condensate pump and a new rugged float switch designed specifically for restoration environments.
Want to know more about Cleaning and Restoration?
How can I clean my carpet?
Commercial Carpet Cleaning? Residential Carpet Cleaning? Organic Soil? Petroleum Based Soil? With the many variations of carpet fiber types and soil types it becomes important to match up the correct cleaning products and processes with for the right applications. Contact our free technical support team and we will help you maximize your cleaning efforts! 248-548-5211
What kind of Misting Gun can I use for Sanitizing
There are many variations of misting, fogging and spraying applicators for applying sanitizers. The most important consideration in choosing the correct applicator is the sanitizer/disinfectant product label. The EPA requires users to follow the product label. If the sanitizer/disinfectant does not provide fogging instructions on the label, it may not be used in a fogger. There are specialized sprayers that have interchangeable tips that may allow you to spray, fog or mist making it easier to apply products while staying within labeling instructions. For more information in sanitizing sprayers and applicators, contact our technical support team at 248-548-5211
How to remove pet stains and pet odors safely.
Buyer beware. There are so many pet odor removal products on the market and many of them just do not work. However, there are a few that work extremely well. Professional Carpet Cleaners across North America have had amazing results with products like Grease Magic’s Pet Stain & Odor Remover. As it states right on the label, it is People Safe, Plant Safe and Pet Safe. The pH of the product is 7 (neutral) so it is safe for use on most carpets and does not damage hard wood floors. It is important to note that urine often soaks below the carpet into and sometimes past the pad into the subfloor. This makes removal more difficult for a home owner to do well themselves. Professional Carpet Cleaning firms often use deep flushing equipment to flush urine salts and residues from the carpet and pad. For more technical support on pet stain and urine removal call 248-548-5211.
What is the best way to get rid of mold?
There are multiple ways to remove mold. Ice Blasting, Soda Blasting and removal using specialized chemicals are the most common methods of removal. It is important to note that many mold removal chemicals contain sodium hypochlorite (Bleach) and although they remove ugly mold staining well, it is quite common for the mold to regrow over time. Because of this, it is not the preferred method of mold removal. The most common method of mold removal is strong peroxide based products like Serum. Serum and Accelerator is applied through a specialized sprayer. It quickly and effectively oxidizes mold spores without leaving a salt residue and future food source for future mold growth. Peroxide degrades naturally to oxygen and water leaving surfaces clean and mold free when applied correctly. For more mold removal tech support call 248-548-5211
How do I become Certified in Water Restoration, Mold Removal and Fire Restoration?
For over 28 years Nu-Tech Cleaning System has been a top choice for professional IICRC Certification Training and Technical Support. Visit www.shopnutech.com and click on “Education”. We list classes and training events 90 days in advance so check in often to see new upcoming training opportunities.